PERT Pipe Production Line

PERT Pipe Production LineProduct ApplicationThe PERT pipe produced by this production line is a kind of non-crosslinked polyethylene pipe which can be used for hot water. It is also called hot-resista


PERT Pipe Production Line


Plastic machine supplier


Product Application

Plastic machine supplier

The PERT pipe produced by this production line is a kind of non-crosslinked polyethylene pipe which can be used for hot water. It is also called hot-resistant non-crosslinked polyethylene pipe. It is mainly used in water heating supply system, central air conditioner piping system, floor radiation heating system and solar water heating system, etc.

Product Features                                  

The advantages of our PERT pipe production line are as follows: unique structure, high automation, easy operation, continuous production stable and reliable, etc.


Production Flow


Raw material → vacuum feeding → material drying → single screw extruder → spiral mould → low temperature cooling & sizing device, high level water tank → immersion vacuum setting box → immersion cooling water tank → inkjet printer → belt tractor → double disk winder → finished product inspection & packing.


Extruding machine: single screw extruder uses slotting barrel and new type BM high efficient screw with high rotating speed, high output and strong plastification.

Extruding mould: use spiral shunt type die. The advantages of such die are as follows: even discharge, easy adjustment and remove extruding weld mark, etc. The die is improved to avoid melt fracture during extruding so as to guarantee the surface high finish of PERT pipe. Disk type sizing device is used because its friction force with pipe surface can be minimum so as to avoid adhesion.

Vacuum setting device: the total cooling length is 17m including 1 set vacuum sizing box and 3 sets cooling water tank. This cooling length is allocated to meet required cooling capacity for producing 20x2.0mm pipe at the speed of 15m/min. Also the required additional cooling for pipe cooling should be considered.

Tractor: two claw belt type high speed tractor uses stepless frequency speed control to meet the requirement of hauling stability.

Double disk winder: it has tension control and can automatically adjust the winding speed. Also it is fixed with pipe arrangement device.

There are many kinds of electric control system for choice such as PLC auto control system, the production speed will be high and stable. Also the control system will be easy to operate.


Technical Parameters

型号Model

螺杆直径

Screw Dia.

长径比

L/D

生产速度

Speed

主电机功率

Main Motor Power

总功率

Total Power

生产线长度

Total Length

PERT-32

Normal

65mm

30:1

10 m/min

30kw

60kw

20m

PERT-32

High speed

90mm

30:1

15 m/min

75kw

100kw

40m


Video




Plastic machine supplier

Plastic machine supplier


Technical Parameters

型号Model

螺杆直径

Screw Dia.

长径比

L/D

生产速度

Speed

主电机功率

Main Motor Power

总功率

Total Power

生产线长度

Total Length

PERT-32

Normal

65mm

30:1

10 m/min

30kw

60kw

20m

PERT-32

High speed

90mm

30:1

15 m/min

75kw

100kw

40m



Tel
Mail
Map
QQ